MEAN WELL MSP-300-12 300W Fonte de alimentação médica incluída
Descrição do produto
MODEL | MSP-300-12 | |
OUTPUT | DC VOLTAGE | 12V |
RATED CURRENT | 27A | |
CURRENT RANGE | 0 ~ 27A | |
RATED POWER | 324W | |
RIPPLE & NOISE (max.) Note.2 | 120mVp-p | |
VOLTAGE ADJ. RANGE | 10.2 ~ 13.8V | |
VOLTAGE TOLERANCE Note.3 | ±1.0% | |
LINE REGULATION | ±0.3% | |
LOAD REGULATION | ±0.5% | |
SETUP, RISE TIME | 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load | |
HOLD UP TIME (Typ.) | 16ms/230VAC 16ms/115VAC at full load | |
INPUT | VOLTAGE RANGE Note.5 | 85 ~ 264VAC 120 ~ 370VDC |
FREQUENCY RANGE | 47~63HZ | |
POWER FACTOR (Typ.) | PF>0.95/230VAC PF>0.99/115VAC at full load | |
EFFICIENCY (Typ.) | 88% | |
AC CURRENT (Typ.) | 4.5A/115VAC 2.25A/230VAC | |
INRUSH CURRENT (Typ.) | 35A/115VAC 70A/230VAC | |
LEAKAGE CURRENT Note.7 |
Earth leakage current < 450uA/264VAC , Touch leakage current < 100uA/264VAC |
|
PROTECTION | OVER LOAD | 105 ~ 135% rated output power |
Protection type : Constant current limiting, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 14.4 ~ 16.8V | |
Protection type : Shut down o/p voltage, re-power on to recover | ||
OVER TEMPERATURE | 95°C±5°C(TSW1) detect on heatsink of power transistor | |
100°C±5°C for 3.3V,5V,7.5V; 95°C±5°Cfor others (TSW2:detect on heatsink of power diode) | ||
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down. | ||
FUNCTION | 5V STANDBY | 5VSB : 5V at 0.3A ; tolerance ± 5%, ripple : 50mVp-p(max.) |
DC OK SIGNAL | PSU turns on : 3.3 ~ 5.6V ; PSU turns off : 0 ~ 1V | |
REMOTE CONTROL | RC+/RC- : 4 ~10V or open = power on ; 0 ~ 0.8V or short = power off | |
FAN CONTROL (Typ.) | Load 35±15% or RTH≥50°C Fan on | |
ENVIRONMENT | WORKING TEMP. | -40~+70°C (Refer to derating curve) |
WORKING HUMIDITY | 20~90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -40~+85°C, 10~95%RH | |
TEMP. COEFFICIENT | ±0.03%/°C(0~ 50°C) | |
VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes | |
SAFETY&EMC | SAFETY STANDARDS | ANSI/AAMI ES60601-1, IEC60601-1 approved |
WITHSTAND VOLTAGE | I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |
EMC EMISSION | Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 | |
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2 | |
OTHERS | MTBF | 176K hrs min. MIL-HDBK-217F (25°C) |
DIMENSION | 199*105*41mm (L*W*H) | |
PACKING | 0.95Kg;15pcs/15.3Kg/0.69CUFT | |
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
|
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||
4. The power supply is considered a component which will be installed into a final equipment.The final equipment must be re-confirmed that it still meets EMC directives. | ||
5. Derating may be needed under low input voltages. Please check the derating curve for more details. | ||
6. No load power consumption<0.5W when RC+ & RC- (CN100 pin1,2) 0 ~ 8V or short. |
Grupo de Produto : Mean Well Ac / Dc comutação de alimentação > Fonte de Alimentação Médica WELL 100W a 600W